Kenwood NX-920GK NEXEDGE 800 MHz Digital and FM Mobile Radio
Kenwood’s new NX-920 NEXEDGE® 20 Series 800 MHz mobile radio features GPS plus an advanced feature set that meets a wide variety of industrial and public sector applications.
15W (806-870 MHz) RF Power Output
260 CH-GID / 128 Zones
10 Character Alphanumeric Aliases
Backlit LCD & Keys
Function / Status LCD Icons
Transmit / Busy / Call Alert / Warn LED
Blue Function / Status LED
On / Off Power Control
4 Up / Down Selectors
6 Front PF Keys
Emergency / AUX Key
4W Speaker Audio
Zone / CH Number Voice Announcement
DB-15 Accessory Connector
6 Programmable AUX I / Os
KPG-141D Windows® FPU
Flash Firmware Upgrading
MIL-STD-810 C/D/E/F/G
IP54 Water & Dust Intrusion
PC Serial Interface
SDM Manual Input*1
Transparent Data Mode*1
Built-in GPS Receiver Model: NX-920GG
Available (Optional KRA-40G GPS Active
Antenna required for GPS functions)
-
Digital-Conventional Mode
64 Radio Access Numbers (RAN)
Individual & Group Selective Call
Mixed FM / Digital Operation
Conventional IP Networks
Site Roaming -
Digital-Trunking Mode
Individual Private Call
Group Call & Broadcast Call
Telephone Interconnect*3
Transmission Trunked Mode*3
Message Trunked Mode*3
Call Queuing with Priority*3
Late Entry (UID & GID)*3
4 Priority Monitor ID’s*3
Remote Group Add*1
Failsoft Mode -
Digtial-General
NXDN® Digital Air Interface
AMBE+2™ VOCODER
6.25 & 12.5 kHz Channels
Over-the-Air Alias
Over-the-Air Programming*2
Paging Call
Emergency Call
All Group Call
Status Messaging*1
Remote Stun / Kill*1
Remote Check*1
Short & Long Data Messages*1
GPS Location with Voice*1
NXDN® Scrambler Included -
Fleet Sync/ II (FM)
PTT ID ANI / Caller ID
Selective / Group Call
Emergency, Status & Test Messages*1 -
FM Modes-General
25 & 12.5 kHz Channels
NPSPAC Channels
Conventional & LTR® Zones
FleetSync® / II, MDC-1200, DTMF
QT / DQT (Conventional Zones Only)
Voice Inversion Scrambler (16 Codes) -
MDC-1200
PTT ID ANI / Caller ID*3
Emergency, Radio Check & Inhibit*1 Requires NX subscriber unit PC Serial Interface compatible software application
(e.g KENWOOD AVL & Dispatch Messaging software) or hardware (e.g. console).*2 Requires KENWOOD OTAP Management software.
*3 These trunked features are primarily for system programming and operational dependent.
Priority Monitor also requires NX subscriber settings.*4 Up to 8 different Trunked Networks can be configured per radio (each in a zone).
-
Multi-Site IP Network Compatible
60,000 GIDs / UIDs
Wide Area Group Call
Auto Roaming Registration
Group Registration -
SCAN
Single Zone / Multi-Zone / List Scan
Single Priority Scan (Conventional)
- Adapter Cables
- Antennas
- Audio Accessories
- Cables
- Mobile Microphones
- Remote Speaker Microphones
- Speakers and Amplifiers
-
KCT-18
KCT-18 IGNITION SENSE CABLE(requires KCT-60) -
KCT-36
KCT-36 3m Extension Cable (for KCT-60) -
KCT-60
KCT-60 CONNECTION CABLE (D-sub 15 to Molex 15 Pin Connector) -
KES-3
KES-3 EXTERNAL SPEAKER (compact low profile;3.5 mm plug) -
KES-5
KES-5 EXTERNAL SPEAKER (40 W max input,requires KAP-2) -
KLF-2
KLF-2 LINE FILTER -
KMB-10
KMB-10 KEY LOCK ADAPTER -
KMC-30
KMC-30 Microphone -
KMC-32
KMC-32 16-key Keypad Microphone -
KMC-35
KMC-35 MICROPHONE -
KMC-36
KMC-36 KEYPAD MICROPHONE -
KMC-9C
KMC-9C Desktop Microphone -
KRA-40G
KRA-40G GPS ACTIVE ANTENNA
